home *** CD-ROM | disk | FTP | other *** search
- Newsgroups: comp.sys.amiga.hardware
- Path: actrix.gen.nz!cpalmer
- From: cpalmer@atlantis.actrix.gen.nz (Colin Palmer)
- Subject: Re: MBX 1230
- Message-ID: <DMtJ6K.Jqx@actrix.gen.nz>
- Sender: news@actrix.gen.nz (News Administrator)
- Organization: Actrix - Internet Services
- Date: Thu, 15 Feb 1996 13:08:43 GMT
- References: <4f7grb$i9f@oravannahka.Helsinki.FI> <DMELDK.IDw@aston.ac.uk> <150343@cup.portal.com> <4fr9dt$ni9@alius.hgs.se>
- X-Nntp-Posting-Host: atlantis.actrix.gen.nz
-
- In article <4fr9dt$ni9@alius.hgs.se>, Johan Forsberg <na95jfg@HGS.SE> wrote:
- > Sean - Curtin (squirrel@cup.portal.com) wrote:
- > : >Apart from the autoconfig bit (which is only the ram, and is easily fixed)
- > Ah... how is this fixed?
-
- By using the AutoXA program (if you didn't get a copy with your 1230XA,
- it's available on Aminet). It's invisible after the initial reboot, so
- it's not a big problem.
-
- The manual claims that the RAM will autoconfig with Kickstart 3.1 or
- later, can anyone here confirm/deny this?
-
- > Anyway, my MBX1230XA works well, too. Not one of the fastest 50MHz 030 boards
- > I think, but it works.
-
- In the tests I've seen there's no real difference between the MBX1230XA
- and any of the other 68030-50 boards available.
-
- --
- /// --------------------+-----------------------------------------------+
- /// Colin Palmer |A! JW21 YK++i WK+++ DT+ P&B++ SL++^ SK+++ GDF- |
- \\\/// cpalmer@actrix.gen.nz | P+ $+ E19a Ee13c H2 PonSadMeal XBHurts Ay75 M |
- \XX/ -----------------------+-----------------------------------------------+
-